博客
关于我
强烈建议你试试无所不能的chatGPT,快点击我
Apache搭建多个站点方法详解
阅读量:5735 次
发布时间:2019-06-18

本文共 4482 字,大约阅读时间需要 14 分钟。

www.111cn.net 编辑:Bolshevik 来源:转载
Apache的虚拟主机是一种允许在同一台机器上配置多个不同站点的web服务器环境的,就是iis一样可以创建多站点了,但是apache需要在编辑状态操作,不能像windows iis直接点击几下就好了,下面我来给各位介绍配置方法。

最平常的大概有3种方法。

第一种:单IP不同端口

第二种:多IP同端口(独立IP的虚拟空间)

第三种:域名绑定根目录的方式(共享IP的虚拟空间)

Apache的核心配置文件名是”httpd.conf”,其所存放的路径在Apache目录下的conf文件夹下。修改它只需要使用记事本(建议使用其他编辑器,带行数的那种,方便修改),生效的话只需要保存httpd.conf,重启即可。

下面多站点支持的话,修改httpd.conf的第187~264行(不同的httpd.conf可能有差异),也就是在ServerAdmin和ServerName那里,大部分是注释。下面是主要修改的地方。

注意:如果是服务器请备份httpd.conf后再修改文件。

 代码如下 复制代码

# 'Main' server configuration

#
# The directives in this section set up the values used by the 'main'
# server, which responds to any s that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#

# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin admin@example.com

#

# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName www.example.com:80

#

# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other 
# <Directory> blocks below.
#
<Directory />
    AllowOverride All
    Require all denied
</Directory>

#

# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#

# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "g:/www"
<Directory "g:/www">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

    #

    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keys:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride All

    #

    # Controls who can get stuff from this server.
    #
    Require all granted
</Directory>

第一种一般是测试环境,毕竟加了端口,如何绑定域名,访问的时候域名后面也需加端口。

例子分别通过80和8080访问不同的根目录。

大概在50几行有个Listen 80,在下面添加8080端口。

 代码如下 复制代码

Listen 80

Listen 8080<VirtualHost *:80> 
    ServerAdmin admin@myxzy.com 
    ServerName localhost:80 
    DocumentRoot "g:/www1" 
     <Directory "g:/www1"> 
     Options  Indexes FollowSymLinks 
     AllowOverride All 
     Require all granted 
   </Directory>   
</VirtualHost> 
<VirtualHost *:8080> 
    ServerAdmin admin@myxzy.com
    ServerName localhost:8080  
    DocumentRoot "g:/www2" 
   <Directory "g:/www2"> 
     Options Indexes FollowSymLinks 
     AllowOverride All 
     Require all granted 
   </Directory>       
</VirtualHost>

第二种多IP同端口。

IP地址1:192.168.2.2

IP地址2:192.168.1.68

端口同是80端口。

 代码如下 复制代码

<VirtualHost 192.168.1.68:80> 

    ServerAdmin admin@myxzy.com 
    ServerName localhost:80 
    DocumentRoot "g:/www1" 
     <Directory "g:/www1"> 
     Options FollowSymLinks 
     AllowOverride All 
     Require all granted 
   </Directory>   
</VirtualHost> 
<VirtualHost 192.168.2.2:80> 
    ServerAdmin admin@myxzy.com
    ServerName localhost:80 
    DocumentRoot "g:/www2" 
   <Directory "g:/www2"> 
     Options FollowSymLinks 
     AllowOverride All 
     Require all granted 
   </Directory>       
</VirtualHost>

第三种同IP不同域名和根目录(域名的话修改本地host演示)。

 代码如下 复制代码

<VirtualHost 192.168.2.2:80> 
    ServerAdmin admin@myxzy.com 
    ServerName www.111cn.net 
    DocumentRoot "g:/www1" 
     <Directory "g:/www1"> 
     Options FollowSymLinks 
     AllowOverride All 
     Require all granted 
   </Directory>   
</VirtualHost> 
<VirtualHost 192.168.2.2:80> 
    ServerAdmin admin@myxzy.com
    ServerName www.111cn.net
    DocumentRoot "g:/www2" 
   <Directory "g:/www2"> 
     Options FollowSymLinks 
     AllowOverride All 
     Require all granted 
   </Directory>       
</VirtualHost>

转载于:https://www.cnblogs.com/imsoft/p/5074507.html

你可能感兴趣的文章
Redrain duilib中事件委托存在的问题
查看>>
43、我的C#学习笔记9
查看>>
网站建表实践及优化
查看>>
字符串的简单操作
查看>>
C#新功能--命名参数与可选参数
查看>>
strtok和strtok_r
查看>>
维辰超市:借助云商城成功转型新零售
查看>>
web.xml中<load-on-start>n</load-on-satrt>作用
查看>>
python之路---进程
查看>>
1061. Dating (20)
查看>>
leetcode 【 Best Time to Buy and Sell Stock II 】python 实现
查看>>
【算法】CRF
查看>>
windows 8 微软拼音输入法
查看>>
Windows UI风格的设计(7)
查看>>
SQL中使用WITH AS提高性能 使用公用表表达式(CTE)简化嵌套SQL
查看>>
oracle 强行杀掉一个用户连接
查看>>
Git提交本地库代码到远程服务器的操作
查看>>
灾难拯救——让软件项目重回轨道
查看>>
ssh链接git服务器,解决push pull要求输入密码问题
查看>>
Netty 源码解析(二):对 Netty 中一些重要接口和类的介绍
查看>>